How to use a fiber fast connector?

　　The widespread application of optical fiber -to -household (FTTH) promotes the rise of fiber fiber fast connectors. This product has the characteristics of small volume and fast -end connection, and the small loss and high stability are the essential optical fiber system for optical fiber systems. Connection device. Today I will introduce the tutorial of the optical fiber fast connector.

　　About optical fiber fast connectors

　　The optical fiber fast connector is a very innovative on -site connector. At present, the fiber fast -moving connecter on the market can end the diameter of 250 μm, 900 μm, 2.0 mm, and 3.0 mm single -mode fiber and multi -mode fiber.

　　The use of optical fiber fast connectors

　　Although the use of fiber fast connectors is very simple, the correct steps must be followed during installation. In general, the installation process of the fiber fast connector is as follows:

　　Step 1: Prepare optical fiber fast connectors, optical fiber stripping clamps, fiber fiber cutting knives, optical fiber cleaning tools, etc.;

　　Step 2: Wear the connecter tail cover for the optical cable;

　　Step 3: Dipping the outer sleeve of the optical cable with optical fiber tongs, cleaning the fiber, and then cutting the nude fiber with the fiber fiber, the length of the naked fiber is reserved according to the specific situation;

　　Step 4: Insert fiber into the fiber fast connector;

　　Step 5: Press the cover to lock the fiber;

　　Step 6: Put the tail cover for the fiber fast connector.

Read recommendations:

M1949 2.0x9.3(1.5A)

M461 1.8X6.8

Copper spring terminal M096 3×14

The characteristics of pogo pin connector are thin and small

High-current BTB shrapnel microneedle module for battery connector testing.Electronic connector pric