Electronic reversing POGOPIN structure

　　Twist spring is divided into single -twist spring and double twist springs. Spring is often set in sales or axis. When the external force is subject to external force, it will generate a twist force according to the spring shaft of the spring shaft, so that the spring rolls or spin loose. Double twist spring. It is divided into external double twist and internal double torque springs. Each circle either is closely surrounded or separated by separation. The spring is the pole of the variant spring, from single to double twist, and even the deformation of various twist rods. It must be formed according to design .? Turn on the spring is a more complicated design principle in all spring categories. Live, so the theory involved in design is also the most annoying. Therefore, it is also difficult to grasp the design when design .? The advantages of centralized transmission. You can use single -piece pair -pair -pair combination, multi -film overlapping combination and hybrid combination to obtain various different curves.

Read recommendations:

M1643 4.0x7.8(1A)

M1764 1.5x3.0(1A)

M1290 2.00x4.00(1A)

What are the advantages of replacing springs with high-current thimbles in car chargers?

Introduction to Magnet Connector Charging