NEWS

Pay attention to industry information, focus on product hotspots

Location: Home  >  News  >  pogo pin
Company News Industry News spring thimble pogo pin

Board-to-board pogopin connector usage requirements and how to troubleshoot hidden dangers!pogopin

source:pogo pin release time:2021-09-18 Article author:sznbone Popular:POGO PIN

  Board-to-board pogopin connector usage requirements and how to troubleshoot hidden dangers

  Because the board-to-board pogopin connector has many pins, and the pin connections inside the interface will wear out every time it is connected, it is necessary to avoid plugging and unplugging the pogopin connector too frequently, otherwise it will affect the board-to-board pogopin The life of the connector. Moreover, when the board-to-board pogopin connector is installed, generally for safety reasons, the pogopin connector cannot be used immediately, and the welding quality must be inspected. Then everyone knows how to use and troubleshoot welding risks?

Board-to-board pogopin connector usage requirements and how to troubleshoot hidden dangers!pogopin (图1)

  1. In the selection of HRS board-to-board pogopin connector, it is necessary to choose excellent high and low temperature resistance, and also have the ability to resist impact and extrusion. Since the pogopin connector is not used in fixed occasions, many devices must be operated in special occasions. If the pogopin connector does not have these operating functions, the use of the pogopin connector is generally relatively simple.

  2. Do not mess with the metal sheet on the side of the pin connected by the scraper to the board. Otherwise, once it is scratched, it will affect the working function and service life of the pogopin connector. It may cause some data transmission abnormalities in the use of the pogopin connector.

  3. Before using the board-to-board pogopin connector, pay attention to check the pogopin connector to see if the connection is bad or whether it is completely locked, so as to avoid simple failures when using the pogopin connector.

  4. Due to the long use time of the HRS board connector, some dust or other small debris will accumulate inside. Therefore, when dealing with these problems for the pogopin connector, it is necessary to pay attention to the general silk cloth dampened with water to clean it, so as not to Some other components inside the pogopin connector become damp and fail.

  5. HRS board-to-board pogopin connectors must have excellent high and low temperature resistance when selecting them, and they must also have the ability to resist impact and extrusion. Since the pogopin connector is not used in fixed occasions, many devices must be operated in special occasions. If the pogopin connector does not have these operating functions, the use of the pogopin connector is generally relatively simple.

  Safety hazard elimination method one

  Ordinary board-to-board connectors are inspected by welding their solder joints. Usually there is a clear contour separation line between the solder and the solder base, and the size of the end of the printed board pad becomes smaller. Thereby, it is judged that there is no abnormal factor influence on the welding quality of the plate joints.

  Safety hazard elimination method 2

  Because after the board-to-board pogopin connector is welded, it is generally impossible to observe the solder joint quality of the pogopin connector with the naked eye, so it is necessary to use a conventional X-ray flaw detector for inspection, and the board-to-board on each module The pogopin connector is tested, and the test results show that if the solder joints on the pogopin connector have the same shape, it can prove that the soldering quality of the pogopin connector is not very good, and the solder pitch of the solder joints of the board-to-board pogopin connector is not equal , That is, it can be judged whether the influence such as offset has occurred.


Read recommendations:

M2742 6.0x13(1A)anode electrode Production

M2716 5.5x7.25(1A)anode electrode company

M2648 7.5x5.8(4A)anode electrode company

Introduction to storage of board-to-board connectors!Antenna probe company

competition faced by pin header and female pogopin connectors can be divided into two aspects.pogo

Related Information

Introduction to storage of board-to-board connectors!Antenna probe company

2021-10-13

competition faced by pin header and female pogopin connectors can be divided into two aspects.pogo

2021-10-12

Analysis of the future development trend of the pogopin connector market in my country!pogo pin

2021-10-12

What are the functional characteristics of the board-to-board pogopin connector?pogopin price

2021-10-12

How to check the board to the pogopin connector and the production process

2021-10-11

How to evaluate the price of pogopin female header connector

2021-10-11

Introduction to Magnet Connector Charging

2021-10-09

Introduction to the product principle of pogo pin connector

2021-10-09

pogopin mechanical parameters!pogopin manufacturer

2021-10-08

Pogopin electrical parameters!RF Pogo Pin price

2021-10-08

Let me tell you how to choose the right connector?

2021-09-30

Pogopin pogo pin connector life!pogopin price

2021-09-30

What is the development space for round hole pin headers?pogo pin Vendor

2021-09-29

Precautions for board-to-board connectors and operating points that are easy to overlook!

2021-09-29

pogopin connector manufacturers!Antenna thimble company

2021-09-28

how to improve the performance of the pogopin connector!Spring thimble manufacturer

2021-09-28

How to choose pogopin connector!Antenna thimble Production

2021-09-28

How to prevent bad elements from occurring in round hole pin headers?Antenna thimble price

2021-09-27

How do pin header manufacturers introduce the difference between cable connectors and device connect

2021-09-27

What is the difference between metal plate to pogopin connector and plastic plate to pogopin connect

2021-09-26

Pogo pin probe connector related knowledge!Connector factory

2021-09-26

the materials and development trends of electronic connectors!radioactive probe company

2021-09-25

SMD connector in wire-to-board connector!Probe connector Wholesale

2021-09-25

Pogo Pin connector design principle

2021-09-25

Application of spring in mobile phone connector!porcelain thimbles price

2021-09-25

Large market demand for round hole pogopin headers!RF Pogo Pin factory

2021-09-24

What are the technical characteristics and wiring methods of the pogopin connector on the board?

2021-09-24

The importance of round hole pin headers!pogopin price

2021-09-24

Coordinate adjustment of CNC lathe!lathe brass parts

2021-09-23

Vibration analysis of CNC lathe

2021-09-23

86-755-89900596