Pogo pin connector with tail

　　Pogo Pin connector is also called: spring thimble connector, charging pin connector, probe connector, etc.; it mainly used in electronic products, such as mobile phones, computers, communication equipment, medical equipment, aviation equipment, drones, smart wear, smart electronics, etc. The Pogo Pin connector is a special connector. The basic structure consists of a turning needle tube, a turning needle, a compression spring, and a plastic core. What problems should be paid attention to for the Pogo Pin connector with tail?

　　Pogo Pin connector

　　First, the contact direction of the Pogo Pin connector with tail: The direction of the Pogo Pin connector with tail should be vertical when it is working, so as to avoid stress on the Pogo Pin connector from the side and other non-vertical directions.

　　Second, the battery contacts or FPC golden fingers that are paired with the tail-type Pogo Pin connector must not be dirty, oxidized, etc.:

　　1. There should be no residual sealing liquid;

　　2. There should be no other dirt residues;

　　3. The Pogo Pin connector with tail should avoid touching the plastic partition during assembly.

　　Third, the Pogo Pin connector with tail is easy to pin during the assembly process.

　　The compression of the tail-type Pogo Pin connector is generally 2/3 of the total stroke; too little press-in and insufficient positive force will result in unstable impedance; too much press-in will damage the nozzle and cause pin stuck. During the assembling process, also pay attention to avoid damaging the nozzle, which may cause pin stuck.

　　Precautions for prolonging service life

　　1. Friction corrosion

　　The friction and the existence of various corrosive substances in the working environment of the Pogo Pin connector will greatly reduce the service life of the Pogo Pin connector.

　　2. Electrical failure

　　Electrical failure generally refers to a problem with the connection between the wire and the terminal, which also directly affects the service life of the Pogo Pin connector. In order to effectively solve this problem, there is now an enhanced new type of crimping technology, which is an upgraded version of the previous crimping technology.

　　3. Plugging problem

　　The plugging problem of Pogo Pin connector is an important factor that affects the service life. It is difficult to control the plugging force. It is easy to fall off if it is small, and it will be damaged if it is large. The most commonly used method now is to control different insertion and extraction forces according to the different places of use. Although it can ensure the application of a part of the Pogo Pin connector to a certain extent, it cannot completely solve this problem.

Read recommendations:

M2732 2.6x7.7(1A) Spring thimble company

M2222 2.1x4.55(1A)

M227 2.7X5.3

pogo pin

What is pogopin?