Connector performance requirements

　　1. Requirements under working conditions: In order for the connector to work normally and stably, the working voltage and working current should not be greater than the rated value of the connector. There are others such as: wire size, conductor area, insulation diameter and so on.

　　2. The electrical performance requirements of the connector in use: the contact resistance and insulation resistance of the connector, as well as the withstand voltage and temperature rise, need to be paid attention to to avoid affecting the stability and service life of the connector.

　　3. The mechanical performance requirements of the connector: a good mobile phone connector has a specified range of insertion force and separation force, and this value cannot be too large or too small; there is also contact retention force, crimping tensile strength, Vibration, shock, durability, etc.

　　4. The environmental performance of the connector: whether it can withstand high temperature and whether it can work normally at low temperatures; constant damp heat, alternating damp heat; salt spray test, sulfur dioxide test and hydrogen sulfide test to ensure that the connector can be normal in a complex environment Stable job.

Read recommendations:

M3100 1.55X6.0(3A)High current probe Production

Charging pin M064 2.0X12.5

High current probe M1987 2.0X6.9(2A)Elastic contact Production

What is the design of the spring Pogopin derivative?types of electrodes in electrochemistry

What are the spring types of pogo pin connector?Through Hole Pogo Pin factory