How to reduce the wear and tear of the pin jack of the pogo pin connector?

　　In the process of connecting the pogo pin connector, the pin needs a certain amount of force to open, and it is easier to separate. Therefore, the interaction of the forces of insertion and removal can easily lead to wear of the pogo pin connector. So how to reduce the wear and tear of the pin jack of the pogo pin connector?

　　Wanchang summarizes and analyzes based on experience and wants to reduce the wear of pogo pin connector pin jacks, you can consider the following methods:

　　1. Enhance the strength of the gold-plated layer on the contact surface, which effectively reduces friction. The contact surface can be nickel-plated and then gold-plated, which will cause less friction than directly plating gold on copper.

　　2. The thicker the nickel layer, the stronger the wear resistance of the gold-plated layer.

　　3. The smoother the surface, the smaller the friction, and the wear of the pins and sockets will decrease.

　　4. During the usual application of the pogo pin connector, it is necessary to regularly maintain the pogo pin connector to reduce man-made damage to the pogo pin connector.

Read recommendations:

M1058 1.8x8.0(1A)

M1283 5.00x5.20(1A)

M1594 2.5x29(1A)

Electronic cigarette pogopin

2 points to note for the pogopin spring thimble on the TWS headset