NEWS

Pay attention to industry information, focus on product hotspots

Location: Home > News > Industry News > 
Company News Industry News

The reason for the electroplating surface layer of the connector

source:Industry News release time:2021-03-09 Article author:sznbone Popular:POGO PIN

  There is a plating layer on the periphery of the commonly used connectors. The thickness of the connector plating layer and the connector plating layer material are determined according to the purpose of the connector, so why should the connector be plated with the surface layer?

Antenna thimble connector M377

  The electroplated layer on the connector surface can prevent the connector from being oxidized and vulcanized and corroded in the working environment. It has a protective effect on the connector and can extend the service life of the connector. The electroplated layer on the outer surface of the connector can improve the ductility, durability, abrasion resistance, and mechanical properties of the connector. The plating layer on the outer surface of the connector can stabilize the impedance of the connector and make the electrical performance of the connector more stable. The electroplated layer on the outer surface of the connector can isolate harmful substances in the environment, which not only can effectively reduce the damage to the connector, but also increase the wear resistance of the connector.

  The electroplated layer on the connector surface not only protects the connector, but also improves the performance of some aspects on the other hand. The electroplated layer is a protection method for the normal application of the connector. Now some connector manufacturers are choosing coating materials that can make the connector work more stable.


Read recommendations:

M1214 1.50x6.70(1A)

Hardware thimble M084 2.3X8.5

M1351 3.50x14.50(1A)

Smart home pogopin connector

Compression spring pogopin formula

86-755-89900596