Definition of magnetic connector

　　Magnetic connectors are also called magnet connectors, magnet connectors, magnetic connectors, magnetic connectors, magnet charging heads, etc.; it is a connector widely used in electronic devices, mainly composed of PogoPin and magnet Connector. The structure design of the magnet and the magnet contacting and attracting has a strong adsorption force, which is suitable for small-sized structures and thin products.

　　The magnetic connector includes a male end component and a female end component coaxial with the male end component. The male end component includes a first outer ring rubber part, a first ring rubber part, a first ring magnet and two male PIN pins. A first ring magnet is arranged between the outer ring rubber part and the first inner ring rubber part. The first inner ring rubber part is threaded with two male PIN pins; and the female end assembly includes a second outer ring rubber part, a second Two inner ring rubber parts, a second ring magnet and two female PIN pins, a second ring magnet is arranged between the second outer ring rubber part and the second inner ring rubber part, and two inner ring rubber parts pass through Female PIN needle; and the first ring magnet will correspond to the second ring magnet, and the opposite end of the second ring magnet has the opposite polarity. The two male PIN needles correspond to the two female PIN needles, and one end of the female PIN needle is provided with Blind hole for male PIN needle insertion.

　　The previous magnetic connector includes an insulating body, a plurality of terminals and magnetic bodies arranged on the insulating body. The front surface of the insulating body has a mating surface, and the mating surface is arranged side by side with several terminal slots penetrating the insulating body. Each terminal slot spaced on the mating surface of the main body is provided with a circle of U-shaped slots arranged around the terminals. The containing slot of the insulating body corresponding to the magnetic body is U-shaped block, and the magnetic body is contained in the body. In the containing tank. The magnetic connector of this kind of structure design has a large structural height and a small suction force, which is not suitable for some small-sized structures, nor is it suitable for relatively light and thin products.

Read recommendations:

M2059 5.8x22(1A)

M2485 2.0x6.9(3A)vintage thimbles Merchant

M1763 3.2x7.1(1A)

What are the advantages of magnetically charged wires?

Introduction to the classification of female header connectors!Probe connector price