Connector pin jack connection mode

　　1. Connector pin jack thread connection method

　　This is a connection form often used in some connector pin jacks that have relatively large-sized contacts and work in a strong vibration environment. This type of connection can be installed with a fuse or nut to prevent loosening after the connection is completed. This connection method is reliable in application, but the connection and disconnection speed is relatively slow.

　　2. Connector pin jack bayonet connection mode

　　This is a reliable and fast way to connect and disconnect. Most of the electrical connectors of the card 121 connection form have a visual display of correct connection and locking, which can be observed from the small hole on the side of the connection nut of the electrical connector.

　　3. Connector pin jack plug connection mode

　　This is a connection method with multiple uses. When the pin jacks and sockets of the electrical connector are connected and disconnected, their moving direction is generally in a reciprocating linear motion, without twisting and rotating, and connecting and disconnecting can be completed with a small working space. Common plug-in connections have two structures: balls or pins. Since this connection form does not have a mechanically labor-saving structure, once it is inserted incorrectly, the mechanical resistance will increase significantly and can be discovered in time.

　　Four. Connector pin jack cabinet connection mode

　　This is an electrical connector used on some equipment that requires blind connection near the frame, which can make electrical equipment lighter, easier to maintain, and more reliable.

　　This type of connection makes it difficult for the operator to feel the connection status, and an accurate positioning device must be designed to prevent forcibly connecting the wrongly inserted connector pins and sockets, making the wrong insertion impossible. Connector pin jacks generally use floating or elastic contact design structure to ensure correct connection.

Read recommendations:

M1606 2.8x5.3(1A)

M1635 0.9X6.6(2A)gene probe factory

M796 2.0X7.8

The reason for the electroplating surface layer of the connector

The use of spring signal needle