How to maintain spring thimble effectively?

　　Spring thimble is a kind of machine tool accessories made by precision machining. If you want to use it well, you must understand the appropriate use skills. Under the condition of good maintenance for the elastic collet, you can do the following maintenance methods.

　　1. At the beginning, each mould is equipped with a resume card, which describes in detail, data analysis, its application, care (lubrication, cleaning, anti rust treatment) and damage, as well as the basic parameters of the molding process and common raw materials of the product, so as to reduce the trial run time of the mold and improve the production efficiency.

　　2. Under the condition of normal operation of the plastic machine and mold, check the various characteristics of the mold and check out the specifications of the molded plastic parts. According to this information, the current situation of the mold can be determined, and the damage of the cavity, core, refrigeration unit and analysis surface can be found. According to the information provided by the plastic parts, the damage of the mold can be identified and the maintenance precautions can be taken measures.

　　3. The important parts of the mold should be tracked and tested: the function of injection and dominant prefabricated components is to ensure the mold opening and closing exercise and plastic injection. If all parts are stuck due to hazards, the production will be stopped. Therefore, it is necessary to maintain the lubrication of the ejector pin and clip spring of the mold, and maintain whether the mold thimble and snap spring cause deformation and watch In addition, attention should be paid to the maintenance of the ductile tensile strength of the transmission gear with transmission system, rack mold roller bearing parts and elastic yellow mold. If there is any damage, it should be removed immediately.

　　4. Pay attention to the surface maintenance of the mold, it will damage the performance of the elastic chuck, the most important is to prevent corrosion, so it is particularly important to use a suitable, high-quality, professional anti rust oil. In the daily task of mold production and processing, different methods should be adopted according to different injection molding plants. Please clean the residual injection molding factory carefully. Copper bar, copper core line and professional mold cleaning agent can be used to clean the residual injection molding plant and other deposits in the mold, and then drying. It is forbidden to use iron wire, stainless steel wire and other hard objects to eliminate, to prevent scratches on the surface. If there is rust caused by etching injection molding plant, it is necessary to use grinding machine to grind and polish, and spray professional antirust oil at the same time, and then put the mold in a dry, cool and dust place for storage.

　　Shenzhen Witchip Electronics Co., Ltd. was established in 2004 and is located in Longgang District, Shenzhen. It has an independent factory building with an area of approximately 6,800 square meters. Integrating research and development, manufacturing, and sales, it is mainly engaged in the research and development and production of various POGOPIN and POGOPIN connectors, shrapnel terminals, and CNC automatic lathe parts. It can also be produced and processed according to customer samples. There are more than 4000 product categories for customers to choose. The products are widely used in various electronic products such as drones, smart robots, smart wearable products, 5G communication products, smart home products, education/entertainment electronics, medical equipment products, automotive electronics, mobile phone consumer electronics, etc.

　　The company’s R&D and designers are experienced engineering technicians with nearly 20 years of experience in the industry. The total number of employees is 120, with 80 CNC lathes, 100 automatic lathes, 80 assembly equipment, and projectors. Salt spray tester, life tester, current tester, high temperature tester, load dynamic impedance tester. In order to comply with the demand for market quality

　　The company passed the ISO9001 quality system certification in 2007 and successively passed the ISO14001 environmental system certification in 2009. It has 8 independent patents, which provide a solid guarantee for quality and delivery.

　　The company has always maintained a leading advantage in the field of Pogopin connector products, adhering to the business philosophy of "gratefulness, innovation, and creating value for customers", and has been recognized by some well-known companies at home and abroad, becoming their excellent connector supplier. Continuously win the trust of customers with quality and service, and establish a good reputation.

Read recommendations:

M3243 4.0x5.6(1A)medical electrodes company

M720 2X7.8

M1407 5.00x23.10(2A)

Factors affecting the life of spring thimble

What is the effect of spring thimble load work? So how to maintain it?