What should be paid attention to when using spring pin connector

　　Spring pin connector is also called pogo pin connector, charging pin connector, probe connector, etc.; it is mainly used in computers, printers, GPS positioning, communication equipment, medical equipment, aviation equipment, etc; Spring pin connector is a special connector. Its basic structure is mainly composed of a turning needle tube, a turning needle head, a compression spring and a plastic part. The needle is curled at the nozzle of the needle tube to maintain the needle in the needle tube. The contact force is provided by the spring to make the electrical connection between the needle and the docking parts. But the use of spring pin connector should also pay attention to, the following Wanchang and you will talk about its use notes.

　　What should be paid attention to when using spring pin connector (Fig. 1)

　　1. Contact direction of spring thimble connector

　　The working direction of spring thimble connector should be vertical to prevent the spring thimble connector from being stressed in other non vertical directions from the side.

　　2. The battery contact or FPC gold finger matched with spring thimble connector shall not be dirty or oxidized.

　　A. No residual sealing fluid is allowed;

　　B. No other dirt residue is allowed;

　　C. The spring thimble connector should be prevented from touching the plastic barrier during assembly and use.

　　3. The compression amount of spring thimble connector is usually 2 / 3 of the total stroke; too little press in and insufficient positive force will lead to unstable impedance; if too much is pressed in, the pipe orifice will be damaged, resulting in card pin. In the process of assembly, special attention should be paid to prevent the pipe mouth from being bumped and causing card pin.

　　4. The spring thimble connector head and nozzle should be prevented from touching the plastic barrier during assembly and use.

　　Shenzhen Wanchang Electronic Co., Ltd. was founded in 2004, located in Longgang District, Shenzhen, with an independent factory building, covering an area of 6800 square meters. With the integration of R & D, manufacturing and sales, the company is mainly engaged in R & D and production of various pogopin and pogopin connectors, shrapnel terminals, and CNC automatic lathe parts. It can also be produced and processed according to customer's sample drawings. There are more than 4000 kinds of products for customers to choose from. The products are widely used in UAV intelligent robots Intelligent wearable products, such as 5g communication products, smart home products, education / entertainment electronic products, medical equipment products, automotive electronic products, mobile consumer electronics and other electronic products.

　　The company is engaged in R & D and design, with nearly 20 years of experienced engineers and technicians in the industry. The total number of employees is 120, with 80 CNC lathes, 100 automatic lathes, 80 assembly equipment, and projector, quadratic salt spray tester, life tester, current tester, high temperature tester, load dynamic impedance tester. In order to meet the demand of market quality, the company passed the ISO9001 quality system certification in 2007, and passed the ISO14001 environmental system certification successively in 2009. It has 8 independent patents, which provides a solid support for quality and delivery.

　　The company has always maintained a leading position in the field of pogopin connector products. Adhering to the business philosophy of "gratitude, innovation, and creating value for customers", the company has been recognized by some well-known enterprises at home and abroad, and has become their excellent connector supplier. With quality and service to win customer trust, and establish a good reputation.

Read recommendations:

M1276 1.67x3.85(1A)

M1919 4.0X12.0(2A)High current probe company

Electronic spring contacts M037 2.2X3.0

What is the design of the magnetic data cable?

What is the effect of plating process layer on pogopin